Phantasy Star II/Notes

The notes are for the american version. Offsets are different in the japanese version (checked).

Graphics Storage

Basic Compression

The game uses one basic compression scheme, for storing some of the arts, as well as other data (such maps). Here's its description :

First, the data is split in 32 bytes chunks. Then, for each chunk:

• N (byte) : it's a counter. If $FF, the compression is over.
• repeat N times:
  • V (byte) : the value that will be decoded
  • M (long) : a mask indicating the locations in the current 32 byte chunk where to put this value
• At the end of the loop, some locations in the chunks may not have got a value. If so, they are given in raster order after at this point.
• Go to first stage.

An example from the game : the font is located at 0x29EB8

01 : N = 1

we repeat 1 time :

BB : the value

FF88B888 : the mask (=0b11111111100010001011100010001000). The current chunk is :

   BBBBBBBB BBBBBBBB BB?????? BB?????? BB??BBBB BB?????? BB?????? BB??????

Since the loop is over, all subsequent bytes are values for each ?? in the preceding (there are 16 of them) :

11 11 11 16 66 66 16 16 BA AA 16 BA AA 16 BA AB : we get for the 1st chunk :

   BBBBBBBB BBBBBBBB BB111111 BB166666 BB16BBBB BB16BAAA BB16BAAA BB16BAAB

02 : N = 2, so

BB, EE008000 : that gives

   BBBBBB?? BBBBBB?? ???????? ???????? BB?????? ???????? ???????? ????????

55, 00102277 : now we have

   BBBBBB?? BBBBBB?? ??????55 ???????? BB??55?? ????55?? ??555555 ??555555

16 values are left unknown :

B1 15 11 11 B1 66 6B 16 15 B1 61 AB 15 56 B1 15 : so the final value is :

   BBBBBBB1 BBBBBB15 1111B155 666B1615 BBB15561 AB155556 B1555555 15555555

Some example of such graphisms (to be completed) :

29EB8 : Font

2AC66 : SEGA logo

6FF22 : intro art (2)

Nemesis compressed graphisms

Some art uses the well-known Nemesis compression scheme. You can use The Sega Compressor to decompress / recompress them.

Some example of such graphisms : see maps storage.

Font storage

Font patterns

The font is made of 192 8x8 patterns (I use the term 'pattern' to denote 8x8 objects stored in VRAM ; a "tile" is made of several patterns, see later), including :

• icons for battle windows, status, check boxes
• two complete alphabet sets, uppercase and lowercase
• some remaining of the japanese version, unused

Encoding

The encoding doesn't follow the pattern ordering. An actual character is in fact a 8x16 tile (2 patterns heigh) ; the upper pattern is always a space and the bottom one is the actual glyph (in order to allow interline space).

The correspondance is stored in a table starting at 0x12BC8. Each entry is 2 bytes, the first being always 0x26 (rank of the space in the font patterns ; this was used in the Japanese font to store the dakuten).

For example, the table starts with :

26 26 : so the character with code 0 is made of 2 stacked spaces,

26 97 : one space on top of the 0x97th font pattern, which represents the digit "0"

etc.

Special codes

• 0xBB : [character1] this code is replaced by the name of a character
• 0xBC : [character2] same thing (allows to have 2 characters names in the same sentence, for texts like "XXX heals YYY"
• 0xBD : [monster] replaced by a monster name
• 0xBE : [technique] replaced by a technique
• 0xBF : [item] replaced by an item name
• 0xC0 : [value] replaced by a numeric value
• 0xC1 : carriage return
• 0xC2 : [clear] clear current window
• 0xC3 : [wait] wait for a button to be pressed
• 0xC4 : [end] end of text

Texts

Towns

Towns' names can be found at address 0x10FAE, though I can't confirm it's effectively read by the game. Each name is 5 bytes long.

Note : some names were truncated to fit in 5 bytes. For example, Arima's real name is Arimaya, Oputa is in fact Oputano, Kueri is Kueris.

Items

Items' names are storen in a table starting at 0x12D68.

Each entry in the table is 16 bytes long, the ten first bytes are the item's name.

Then comes :

• (w) price
• (b) type : still unclear
• (b) who can equip it ? it's a record of eight bit-flags. Bit 0 is Rolf, up to bit 7 which is Shir.
• (b) attack modifier
• (b) defense modifier

Throughout the game, items are identified by their index in this table.

Techniques

It's the same scheme. The table is located at 0x13568.

Each entry is 8 bytes long, the 5 first code for the name of the technique, then :

• (b) tp cost
• (b) type (to be studied)
• (b) power (to be studied)

For example, FOI, GIFOI and NAFOI share the same type (0xF1), but their power go increasing (0x0F, 0x28, 0x82).

Ennemies

Same scheme. Table begins at 0x1779E, each entry is 10 bytes long and only consist in the ennemy name.

Musics

Likely only used when visiting Ustvestia. Located at 0x18ADA, 12 bytes per track.

Dialogs

There's a table of adresses (longs) at 0x18BE2. Each address point to a sub-table of inremental offsets (one byte each) : the first offset must be added to the subtable address to get the first dialog, the second offset must be added to the first dialog address to get the second dialog, etc.

Other said, n-th value in the subtable is the length of the (n - 1)-th dialog.

In the game, each dialogue is identified by a word : aabb, where aa is the index of the address in the table (starting at 0), and bb the index in the sub-table (starting at 1). It can help for locating some pieces of code.

Example : dialog with id = 0x1502 : The address of the subtable is at 0x18BE2 + 0x15*4 = 0x18C36, we find 0x1DB5A

At this address we read 04 28, so the address of the 1st dialog is at 0x1DB5A + 0x04 = 0x1DB5E and the address of the 2nd is at 0x1DB5E + 0x28 = 0x1DB86.

We find the data :

   0B 00 3D 33 ... C4 (up to 0x1DC18)

that translates to :

   A young girl is battling
   a giant demon. I am
   close by, but can't move
   or speak! All I can do[wait]
   is watch while the demon
   keeps striking at the
   girl.

The first table allows to move the dialog texts in the ROM quite easily.

Due to the system of incremental pointers, a text is limited to 255 characters maximum. To overcome this limitation, the game engine allows to load up to 4 texts one after another, but it has to be hardcoded.

I implemented a quick hack that allows, inside the dialog text, to give the index of the next dialog, so it's not hardcoded anymore. It seems to work.

End of text is generally given by a 0xC4 or a 0xC5 value. But if not present, the dialog decrypting routine stops by itself once the 255-th character reached.

Interface

The basic interface system (blue windows and checkboxes with a red flashing cursor) is quite annoying to modify (for example with the aim to enlarge or rearrange windows, to allow longer words).

Windows

The windows information is stored as a table located at 0x13760.

Each entry is 8 bytes long, under the form :

• a word, of the form 0x4000 + y*128 + 2*x, where x and y are the coordinates (in 8x8 units) of the top-left corner of the window
• a long, which is an offset to the representation of the content of the window (see later)
• a byte, which is the width (in 8 units) of the window - 1 (including borders)
• a byte, which is the height (in 8 units) of the window - 1 (including borders)

The first entry of the table has no use as far as I can tell.

The offset to the representation of the window can be located in ROM, for windows whose content is always the same, or in RAM, for windows whose content varies (for example, character selection windows, item or technique selection).

Example : the main menu window has id 1. Its description starts at 0x13768 :

 4082 00013B08 08 0A

0x4082 = 0x4000 + 1*128 + 1*2, so the window is located at (1, 1) with 8x8 units, that is to say at (8, 8) in pixels units. Its width is 9 x 8 = 72 pixels, and its height is 11 x 8 = 88 pixels, and the content of the window is located at ROM 0x13B08.

At 0x13B08, we find :

 B9 B9 B9 B9 B9 B9 B9    ======= (upper border) 
 B4 B5 2F 3A 2B 33 26    []ITEM  ([] = checkbox)
 26 26 26 26 26 26 26            (spaces to separate lines)
 B4 B5 39 3A 27 3A 2B    []STATE
 26 26 26 26 26 26 26           
 B4 B5 3A 2B 29 2E 26    []TECH 
 26 26 26 26 26 26 26           
 B4 B5 39 3A 38 34 2D    []STRNG
 26 26 26 26 26 26 26           
 B4 B5 2B 37 36 26 26    []EQP  
 BE BE BE BE BE BE BE    =======  (lower border)

Notes on RAM window : basic layout is stored in ROM (often, the checkboxes). Finding the address in ROM requires looking into the asm.

Menu

Editing a menu not only requires to edit the window attributes described above, but also the location of the flashing red rectangle (cursor). Sadly, these locations are hardcoded, that means you have to look into the code.

For example, the location of the cursor for the main menu described above is hardcoded at address 0xF7E0 by the lines:

   move.w  #$90,d1 
   move.w  #$90,d2 
   bra.w   setup_checkboxes

the position is given by $80 + actual position, here the actual position is (16, 16).

Some windows with their ids and notes

when followed by a *, the window content is read from the RAM (see above)

• 01 : main menu
• 02*: main menu character selection for items ; basic layout is at 0x15650
• 03*: main menu item selection 1
• 04*: main menu item selection 2
• 05 : use/give/tos item
• 06*: give item, character selection
• 07 : ?
• 08 : dialog window
• 09 : Yes / No
• 10 : State / Order
• 11 : 1st character state
• 12 : 2nd character state
• 13 : 3rd character state
• 14 : 4th character state
• 15 : meseta in state screen
• 16 : new order
• 17 : old order